030 - PTFE - 1SSB

PRODUCT FEATURES
SPECIFICATIONS
DOWNLOADS
ACCESSORIES

Product Code: 030 - PTFE - 1SSB

PTFE hose for medium pressure from 75 up to 205 bar (from 1000 to 2900 psi)

src= src=

part no.	dash	inch	DN	mm	inch	mm	inch	mm	inch	bar	psi	bar	psi	safety factor	mm	inch	g/m	lbs/ft	ferrule part no.	m
030 - PTFE - 1SSB

part no.	hose size			ID		tube thickness		OD		WP		BP		safety factor	bend radius		weight		ferrule part no.	quantità
0301	-3	3/16	DN5	4,90	0,193	0,75	0,030	7,80	0,307	205	2900	820	11600	4:1	35	1,38	82	0,055	SAG111	186
0302	-4	1/4	DN6	6,50	0,256	0,75	0,030	9,20	0,362	180	2600	720	10400	4:1	45	1,77	100	0,067	SAG121	671
0303	-5	5/16	DN8	8,00	0,315	0,75	0,030	11,00	0,433	170	2400	680	9600	4:1	50	1,97	131	0,088	SAG131	126
0304	-6	3/8	DN10	9,50	0,374	0,75	0,030	12,70	0,500	155	2200	620	8800	4:1	55	2,17	165	0,111	SAG141	483
0305	-8	1/2	DN12	12,80	0,504	0,75	0,030	16,10	0,634	120	1700	480	6800	4:1	70	2,76	218	0,147	SAG151	268
0306	-10	5/8	DN16	16,60	0,654	0,90	0,035	19,80	0,780	85	1200	340	4800	4:1	130	5,12	282	0,190	SAG161	239
0307	-12	3/4	DN20	19,80	0,780	0,90	0,035	23,00	0,906	75	1000	300	4000	4:1	190	7,48	334	0,224	SAG171	241
0308	-16	1	DN25	25,40	1,000	0,90	0,035	28,80	1,134	75	1000	300	4000	4:1	270	10,63	450	0,302	SAG181	455

CLICK HERE FOR ANY FURTHER SUPPORT OR TECHNICAL CONSULTANT

INNER TUBE

Polytetrafluoroethylene

REINFORCEMENT

One braid of stainless AISI 304 wire

COVER

N/A

APPLICATIONS

Aggressive chemicals transfer systems - Compressed air and gases - High or low temperature fluid or gas transfer

FEATURES

Pure PTFE tube material: lightweight resistant to almost all chemicals gases and solvents. Stainless steel braid / cover to support medium pressure requirements. Hose comes in random length coils

TEMPERATURE RANGE

-60 °C to +260 °C (-76 °F to +500 °F)

DESCRIPTION

Lightweight smoothbore hose for standard industrial use especially for high or low temperature and aggressive chemical applications: including some gases (there will be a level of gas permeation which should be taken into account). Care should be taken to ensure proper fitting and ferrule compatibility - we recommend to contact our sales office for fittings selection. Hose not suitable for continuous hydraulic impulse applications. Above 130 °C ( 266 °F) there will be a reduction in maximum working pressure: reduce maximum working pressure by 1% for each 2 °C (3.6 °F) above 130 °C ( 266 °F). Hose suitability must be checked when discharge of electrical static build up is required.