Application for cement industry

For maintenance, repair: - Hydraulic jacks; - Hydraulic Pullers; - Hydraulic torque wrenches; - Hydraulic Presses; Materials: - Hydraulic pumps & valves; - Hoses & fittings; - Tubes & fittings; - Hydraulic filters; - Clamps; - Hydraulic accessories; - Hydraulic Power Units (HPUs); - Oil flushing & filtering; - Design & fabricating the HPUs;

183 - SW AGGRESSIVE CHEMICALS

PRODUCT FEATURES
SPECIFICATIONS
DOWNLOADS
ACCESSORIES

Product Code: 183 - SW AGGRESSIVE CHEMICALS

Thermoplastic hose with hybrid steel wire reinforcement for very high pressure chemicals applications From 280 to 420 bar (4000 to 6000 psi)

Products identified with this icon, are supplied in coils. Depending on hose size and weight, coils can be of various lengths. Upon special request is also possible to supply fixed length coils. Requests for fixed lengths, or any other length limitations, are subject to extra charge.

part no.	hose size			ID		OD		WP		BP		safety factor	bend radius		weight		ferrule part no.		quantity
183 - SW AGGRESSIVE CHEMICALS

part no.	dash	inch	DN	mm	inch	mm	inch	bar	psi	bar	psi	safety factor	mm	inch	g/m	lbs/ft	standard	A316L	m
1836	-10	5/8"	DN16	16,3	0,642	24,8	0,976	420	6000	1680	24000	4:1	220	8,661	720	0,484	SAF161	SAF861	N/A
1837	-12	3/4"	DN20	19,6	0,772	29,2	1,150	350	5000	1400	20000	4:1	240	9,449	940	0,632	SAF171	SAF871	N/A
1838	-16	1"	DN25	25,8	1,016	36,0	1,417	280	4000	1120	16000	4:1	350	13,780	1220	0,820	SAL181	SAL881	N/A

CLICK HERE FOR ANY FURTHER SUPPORT OR TECHNICAL CONSULTANT

INNER TUBE

Polyamide PA12

REINFORCEMENT

Two spiral layers + one braided layer of steel wire.

COVER

Polyamide PA12 - black - non pinpricked - white ink-jet branding

APPLICATIONS

Very high pressure aggressive chemicals systems requiring very high mechanical strength of hose and/or electrical conductivity - Applications requiring high chemical resistance to solvents and aggressive fluids such as two parts polyurethane injection foams

FEATURES

Polyamide type 12 tube construction - Combined reinforcement for high pressure requirements and increased mechanical properties increasing lifetime of the hose under very harsh working conditions - Conductive

TEMPERATURE RANGE

-40 °C to +100 °C (-40 °F to +212 °F):limited to +70 °C (+158 °F) for air and water based fluids

DESCRIPTION

High pressure hose with black cover. Due to particularly low humidity absorption of the tube this hose is particularly indicated for two parts PU foams injection systems (isocyanate and polyols) and very aggressive chemicals applications with increased resistance to abrasion mechanical strength and providing electrical conductivity. Check compatibility list for overview of resistance to chemical substances and gases.